Bathroom Cabinet T0107A Installation Guide

Bathroom Cabinet T0107A combines modern design with practical functions, and adopts environmentally friendly E1-grade eucalyptus multi-layer solid wood paint-free board to ensure long-term use in humid environments. The reasonable size design of the main cabinet and mirror cabinet makes the bathroom space more storage-friendly.

Preparation before installation

Before installing the bathroom cabinet, please confirm the layout of water pipes and power supply to avoid affecting the normal use of lights and sinks. Make sure the wall surface of the installation location is flat and stable, and clean the surrounding space.

Installation Steps

1. After unpacking, check all parts to ensure that there are no defects.
2. Install the main cabinet and mirror cabinet to the specified position according to the instructions, and use a level ruler to ensure that the cabinet body is flat.
3. Connect the water pipes and power supply, and ensure that there is no leakage at the interface.
4. Finally, install the stainless steel hinges of the mirror cabinet and officially hang the cabinet door.

Possible problems during installation

During the installation process, you may encounter the following common problems:

• Cabinet doors are not aligned:This may be due to improper adjustment of the hinge position. You can try to adjust the hinge position to ensure that the cabinet door opens and closes smoothly.
• Sink does not drain smoothly:Please check whether the water pipe connection is tight and make sure that the water pipe is not blocked.
• Radar sensor light does not light up:Check whether the circuit connection is normal and make sure that the radar sensor light is connected to the power supply.

Bathroom cabinet T0107A not only enhances the overall beauty of the bathroom, but also adds practical value to the home. If you have any questions, please feel free to contact us and we will be happy to help you.