Smart Toilet Z-88019 Installation Guide

The smart toilet Z-88019 (tankless design) combines modern technology with user experience, has a simple installation process and is suitable for various environments such as homes, hotels and commercial places.

Installation Steps

1. Check the water pressure: Make sure the water pressure in your home is greater than 0.15Mpa, and measure the water pressure if necessary.

2. Determine the location: Plan the toilet location reasonably and ensure that the distance between the drain outlet and the wall is 300-400 mm.

3. Install the pipe: Make sure the drainage pipe is unobstructed and connected to the toilet water inlet.

4. Connect the power supply: Make sure the power socket is close to the toilet and avoid the power cord being too far away.

5. Test function: After installation, check whether the automatic induction flushing, hot air drying and night lighting functions are normal.

Possible problems and solutions

Insufficient water pressure: If the water pressure at home is lower than 0.15Mpa, it is recommended to contact a professional to adjust the water pressure.

Poor drainage: Check whether the pipe is blocked and clear it if necessary.

Reasonable preliminary preparation can simplify the installation process while ensuring the stability and comfort of the equipment.

The smart toilet Z-88019 is suitable for users who pursue modern smart life, providing a hygienic and efficient use experience, allowing you to enjoy a worry-free life.

For more information, please visit our product page.