Siphon One-Piece Toilet Z-8940 Installation Guide

The Siphon One-Piece Toilet Z-8940 is a modern bathroom product with excellent performance and beautiful appearance. To ensure that its advantages are maximized, the correct installation process is essential. The following are detailed installation steps and possible problems.

installation steps

1. Confirm the distance from the center of the drain outlet to the wall : Before installation, first confirm that the center distance from the drain outlet to the wall is 300 mm or 400 mm to determine whether it meets the installation conditions of the Z-8940 toilet.

2. Clean the sewage pipe : Before installation, make sure there is no blockage inside the sewage pipe and clean it to prevent blockage after installation.

3. Place the bolts : Place the bolts in the mounting holes of the toilet base, aligning them with the drilled holes in the ground.

4. Place the toilet base : Align the toilet base with the drain outlet, gently place it on the ground, and adjust the position of the toilet by correcting it.

5. Secure the toilet : Use bolts to secure the toilet, making sure it is stable and does not shake, then seal the bottom to prevent water leakage.

6. Connect the water supply pipe : Connect the toilet tank to the water source, and make sure the pipe interface is firm and leak-proof during installation.

7. Test the siphon flushing system : After installation, perform multiple flushing tests to ensure that the siphon flushing system works properly and that powerful flushing is unobstructed.

Possible problems and solutions

Problem 1: The position of the sewage outlet is inconsistent <br>Solution: When it is confirmed that the distance from the sewage outlet to the wall does not meet the installation requirements, it can be adjusted by adjusting the sewage pipe or using an auxiliary shifter.

Problem 2: Water pipe interface leaks <br>Solution: Check whether the water supply pipe interface is firmly installed. If leakage occurs, use raw tape to re-wrap the interface to ensure sealing.

Problem three: Failure of the siphon flushing system <br>Solution: If the siphon flushing system fails to work properly, check whether the water level in the water tank is sufficient, or whether the sewage pipe is blocked, and clean or adjust it in time.

Advantages and features of siphon one-piece toilet Z-8940

The Z-8940 toilet uses advanced siphon flushing technology to provide powerful cleaning power. With the humanized design size of 700x420x800mm, it is suitable for a variety of environments such as homes, hotels, office buildings, and medical treatments. Its one-piece design not only saves space, but also has strong environmental protection and water-saving characteristics. It is easy to install, sturdy and durable, and truly meets the needs of environmental protection and beauty in modern society.

Scope of application

The siphon one-piece toilet Z-8940 is suitable for home bathrooms, high-end hotels and commercial buildings, commercial complexes and office buildings, as well as medical institutions and schools, helping to keep the environment clean and hygienic.

Through the above detailed installation instructions and FAQs, you can be sure to successfully install the siphonic one-piece toilet Z-8940, so that it can not only improve the aesthetics and user experience of the bathroom, but also be environmentally friendly and water-saving, and jointly practice the concept of green living.