One-piece toilet Z-8939 product overview

One-piece toilet Z-8939 is the flagship product of our Conjoined toilet series. It adopts advanced super-vortex siphon flushing technology. The size is 690X360X730 mm, suitable for installation with 300 mm and 400 mm sewage outlets. Its high-quality ceramic material is not only beautiful, but also easy to clean and maintain.

Installation steps

1. Preparation: Ensure that the drain outlet position of the installation location meets the product requirements;
2. Install the seat ring: Align the seat ring with the drain outlet and fix it firmly;
3. Connect the water pipe: Connect the water source and ensure that there is no leakage at the connection;
4. Test flushing: Start the flushing function and check its performance;

Precautions

During the installation process, please pay attention to the following points:

• Finally, conduct an overall inspection to ensure that all connections are tightened;
• Follow local installation specifications and hygiene requirements;
• If you use a flushing device with too much power, it may cause excessive water pressure, please adjust it.

Common Problems and Solutions

The following are possible problems and corresponding solutions during the installation process:

• Poor drainage: Check whether the drainage pipe is unobstructed and make sure there are no obstacles;
• Too loud flushing sound: Check whether the flushing system is normal and adjust the water pressure appropriately;
• Water leakage: Confirm that all connections are tightened and replace the sealing ring if necessary.

Summary

Through the above steps, you can easily install the one-piece toilet Z-8939 and fully enjoy its superior performance of quietness and water saving. If you need further after-sales service, please feel free to contact us.