Installation Guide for Mop Basin G-804

The Mop Basin G-804 is a new ceramic product that combines beauty and practicality, suitable for modern homes and commercial spaces. Its back-to-wall design not only saves space, but also shows a modern and simple home style. Below is a detailed guide on how to install the product and possible problems.

Installation Preparation

Before installing, make sure you have the necessary tools and materials, including:

• Electric drill
• Wrench
• Sealant
• Drain pipe connector
• Level

Installation Steps

1. Measure and mark the installation location, and make sure the back wall is load-bearing enough for the installation of G-804.
2. Use an electric drill to drill holes at the marked points, keeping the holes aligned with the drain pipes.
3. Fix the mop basin to the wall and make sure it is level.
4. Connect the drain pipe and make sure there are no missing connections. Use sealant to enhance waterproofing.
5. Check all connections to make sure there are no leaks and that the connections are completely watertight. Once completed, clean up the surroundings.

Possible problems and solutions

Although the installation process is relatively simple, you may still encounter the following problems:

• Insufficient wall load-bearing capacity:Before choosing the installation location, check the wall for cleanliness and strength.
• Mismatched water inlet/drainage connections:It is recommended to confirm the pipe size before installation to avoid inconvenience later.
• Uneven level:Use a level to ensure that the mop basin is installed levelly to help with proper drainage.

Through the above steps, you can easily complete the installation of the mop basin G-804, ensuring that it plays the best role in your modern home or high-end commercial space. If you need more support, please contact us!