One-piece toilet Z-8939 Introduction

The one-piece toilet Z-8939 is an efficient bathroom product that uses super-vortex siphon technology. It measures 690X360X730 mm and has an ergonomic design to ensure user comfort. Its unique flushing system enhances water flow and flushing force, while saving water and being silent, making it suitable for use in homes, hotels and public spaces.

Preparing for installation

Before installing the one-piece toilet Z-8939, make sure the distance between the center of the floor drain and the wall is 300x400 mm. Please prepare the following tools and materials in advance:

• Level
• wrench
• Sealant
• Water pipe connector
• Appropriate fastening screws

Installation Steps

1. Place the toilet base on the ground and make sure the drain pipe is connected to the bottom of the toilet.
2. Use a level to make sure the toilet is level and adjust the bottom supports if necessary.
3. Fix the toilet: Fix the toilet to the ground with screws to ensure stability.
4. Connect the water pipe: Connect the water inlet pipe to the toilet flush valve and check for leaks.
5. When you are finished, check the flush to make sure the toilet is functioning properly.

Common installation problems and solutions

During the installation process, you may encounter the following problems:

• The sewage pipe does not match: Please confirm the pipe position and size in advance. It is recommended to use an extension joint to solve the problem.
• Water leakage due to poor sealing: Please make sure to use enough sealant and replace the seal if necessary.
• Unsatisfactory flushing effect: Check the water pressure and water supply, and make sure the internal components of the toilet are working properly.

It is recommended that installation be performed by a professional to ensure the best experience and performance. If you need more information or support, please feel free to contact us!