Installation Preparation

Before you decide to install the wall-mounted basin E-4162, please make sure to prepare the necessary tools and materials. Common installation tools include electric drills, screwdrivers, water pipe connection materials, etc. Make sure to have the correct installation environment, such as the wall's load-bearing capacity and the location of the water pipe interface to ensure the stability of the wall-mounted design.

Installation Steps

1. Confirm the location: Choose a suitable installation location and ensure it complies with ergonomic principles.
2. Measure the height of the wall mount: According to usage habits, reasonably measure the installation height. It is usually recommended to install it between 40-80 cm.
3. Mark the drill holes: Use a level to make sure the basin is level and mark the hole locations on the wall.
4. Drilling: Use an electric drill to drill holes at the marked locations, making sure that the depth and diameter of the holes meet the requirements of the bolts.
5. Install the bracket: Fix the bracket to the wall and make sure it is stable.
6. Connect the water pipe: Connect the water pipe to the drain outlet of the hanging basin to ensure there is no water leakage.
7. Hanging the basin: Gently hang the basin on the bracket and check the stability.

Common problems and solutions

During the installation process, you may encounter the following problems:

• The wall material is not suitable for wall mounting: If the wall material is weak or uneven, it is recommended to use a professional support device.
• Water leakage problem: Make sure the water pipe connections are well sealed. If there is any leakage, reinstall it immediately.
• Improper installation height: If you feel inconvenient to use, please adjust the installation height in time.

If you encounter other technical difficulties during the process, it is recommended to contact professionals in time to ensure safe and convenient use.