Quick installation of hand shower: even beginners can do it easily

Handheld showerheads not only improve the shower experience, but are also widely popular for their easy installation process. Below are the detailed installation steps that even novices can easily do.

Required Tools

Before starting the installation, please prepare the following tools:

• Handheld Shower Kit
• wrench
• Waterproof tape
• Old towel

Step 1: Remove the old shower head

First, use a wrench to gently unscrew the old shower head. If the old shower head is too tight, you can wrap an old towel around the base of the shower head before using the wrench to prevent damage.

Step 2: Clean the threaded connections

After removing the old shower head, clean the threads of the water outlet to make sure there is no residue or scale. This will ensure that the new shower head can be installed securely.

Step 3: Wrap waterproof tape

Wrap waterproof tape around the threads of the outlet to prevent water leakage. Usually 3-4 wraps are enough.

Step 4: Install the new shower head

Screw the new hand shower onto the spout, tightening it firmly but not too tightly. Tighten it by hand only, no wrench is needed.

Step 5: Test and adjust

After installation, turn on the faucet to test for leaks. If leaks are found, turn off the faucet, slightly adjust the showerhead position or add waterproof tape.

Congratulations, you have successfully installed your new hand shower! Now you can enjoy your comfortable shower experience.