Installation steps

The installation of the smart toilet Z-88018 is relatively simple. Here are the specific steps:

1. Preparation: Check the size of the bathroom space to ensure that it meets the installation requirements of 660x400x550mm, and confirm that the sewage outlet is 300mm or 400mm away from the wall.
2. Connect the water source: Connect the water pipe to the water inlet of the toilet and ensure that the water pressure is greater than 0.15Mpa.
3. Fix the toilet: Place the toilet on the sewage outlet, ensure that the docking is accurate, and then fix it with screws.
4. Power connection: Plug the toilet's power plug into a suitable socket to ensure that all smart functions work properly.
5. Test run:Turn on the water source and power supply, and check whether various functions (such as warm water flushing, hot air drying, etc.) are normal.

Common problems and solutions

During the installation process, users may encounter the following problems:

• The sewage outlet is not accurately connected:It can be solved by adjusting the position of accessories and careful measurement.
• Insufficient water pressure:Ensure that the water pressure is greater than 0.15Mpa, and contact professionals for adjustment if necessary.
• Smart functions cannot be used normally:Check whether the power connection is appropriate and whether the switch is turned on normally.

The smart toilet Z-88018 not only enhances the beauty of the bathroom space, but also provides great convenience for users with its waterless design, fashionable color matching and smart experience. If you have any questions during the installation process, please feel free to contact us and we will serve you wholeheartedly.