Smart Toilet Z-88018 Installation Guide

Smart Toilet Z-88018 is popular among users for its modern waterless design and stylish color matching. Proper installation is essential to realize its smart functions. Before installation, please ensure the following points:

Applicable specifications

Smart Toilet Z-88018 supports standard installation of 300x400mm sewage outlet. Make sure the water pressure is greater than 0.15Mpa so that its warm water flushing and hot air drying functions can be used normally.

Installation steps

1. Confirm the sewage outlet size:Before installation, carefully measure the distance of the sewage outlet to ensure that it meets the standards of Z-88018.
2. Check the water pressure:Use a water pressure gauge to confirm whether the water pressure meets the requirements.
3. Prepare tools:Prepare the necessary tools, such as wrenches and screwdrivers.
4. Connect the water pipe:Connect the water supply pipe to the water inlet of the toilet and make sure the connection is tight.
5. Fix the toilet:Install the toilet according to the sewage outlet to ensure smooth sewage discharge.
6. Power-on test:Debug the smart functions to confirm that they can all operate normally.

Common problems

You may encounter the following problems during installation:

• Insufficient water pressure:If the water pressure is lower than 0.15Mpa, the smart functions of the toilet may not work properly.
• Size mismatch:Make sure the location of the sewage outlet meets the specifications, otherwise the drainage will be affected.
• Loose connection: Check if the water pipes and power supply are firmly connected to prevent water leakage or power outage.

By following the above guidelines, you can easily install the smart toilet Z-88018, providing you with a more comfortable and efficient bathroom experience. Improve the modernity and environmental performance of the bathroom and make your life better!