Water Tank S-12 Introduction

The water tank S-12 is a wall-mounted environmentally friendly and water-saving high-quality water tank with a size of 507x90x1770 mm. It is suitable for a variety of occasions such as home bathroom, public facilities and construction projects. Its modern and simple design combined with silent flow technology provides users with an excellent use experience.

Installation Steps

To install the water tank S-12, you need to follow these steps:

1. Preparation : Before installation, make sure all accessories are complete and read the product manual.
2. Choose a suitable location : Find a location with a strong wall and strong load-bearing capacity to ensure that the water tank is firmly fixed.
3. Connect the water pipes : Make sure the water inlet and outlet pipes are connected correctly to avoid water leaks.
4. Fix the bracket : Use appropriate tools to fix the water tank to the wall and ensure that the bracket is stable and reliable.
5. Check the drainage system : Carefully check whether the drainage system is smooth and clear any possible blockages.

Problems that may occur during installation

During the installation process, you may encounter the following problems:

• Water Leakage : If the connection is not secure or the seal is not good, it may cause water leakage. Please carefully check all connection points after installation.
• Unstable bracket : If the bracket is not firmly installed, the water tank will be unstable or even fall off. Be sure to use the appropriate screws and tools.
• Poor drainage : Check the drain pipe for blockage and ensure it is unobstructed.

Summarize

To ensure the normal use and maintenance of the water tank S-12, it is recommended to refer to the product manual and consult a professional when necessary. Through the correct installation steps and advance understanding of common problems, you can add convenience and environmental protection to your bathroom space.