Z-8939 Super Vortex Siphon One-Piece Toilet Installation Tutorial

Welcome to the installation tutorial of the Z-8939 Super Vortex Siphon One-Piece Toilet. This tutorial will explain in detail how to install this toilet and provide solutions to problems that may arise during the installation process.

Prepare tools and materials

Before you begin installation, prepare the following tools and materials:

• Adjustable wrench
• screwdriver
• Silicone sealant
• Level
• Measuring tape

Step 1: Remove the old toilet

1. Turn off the water and drain the tank and base of the existing toilet.
2. Use a wrench to remove the fixing screws on the toilet base and the wall.
3. Carefully remove the old toilet and clean the drain and floor.

Step 2: Measure the installation location

Use a tape measure to measure the distance from the center of the drain to the wall to ensure that it matches the center distance of the floor drain of the new toilet. Z-8939 provides two options of 300 mm and 400 mm drain center distance to suit different building structures.

Step 3: Install the flange

1. The flange should be firmly installed on the drain pipe outlet, making sure the flange is flush with the ground.
2. Place the sealing ring on the flange, making sure that the sealing ring fits tightly against the flange.

Step 4: Place the toilet

1. Carefully align the Z-8939 toilet onto the flange, making sure the base is aligned with the floor drain.
2. Press down gently to make the toilet fit tightly onto the sealing ring.

Step 5: Secure the toilet

1. Secure the toilet base to the floor using screws.
2. Make sure the screws are tight, but do not over-tighten to avoid damaging the ceramic base.
3. Use silicone sealant to fill the gaps around the toilet base to prevent leaks.

Step 6: Connect to water source

1. Connect the water supply hose to the water inlet of the toilet tank.
2. Turn on the water supply and check whether there are any leaks at the connections.
3. Adjust the water level to reach the specified height of the water tank.

Possible problems and solutions

1. The center distance of the drain outlet does not match: measure in advance and select the correct drain outlet size (300 mm or 400 mm).
2. The toilet is not aligned with the flange: Make sure the flange is installed flat and gently press and fine-tune when placing the toilet.
3. Water leakage: Check whether the sealing ring is installed correctly and reinstall it if necessary.

Summarize

The Z-8939 Super Vortex Siphon One-Piece Toilet has become the first choice for home bathrooms and public facilities with its ergonomic design, powerful flushing technology and silent function. Its installation process is simple, but attention to details is required to ensure the best results. If the center distance of the drain outlet does not match, different sizes of drain outlets can be selected. I hope this tutorial can help you install the Z-8939 toilet smoothly.

For more information, please refer to the product manual or contact relevant customer service support.